Utility

A Thermic Fluid Heater (Thermal Oil Heater) is industrial heating equipment, used where only heat transfers are desired instead of pressure. In this equipment, thermic fluid is circulated in the entire system for heat transfers to the desired processes. Combustion process heats up the thermic fluid and this fluid carries and rejects heat to the desired fluid for concluding the processes. After rejecting it, this fluid comes back again to the thermic fluid heater and this cycle goes on.

VSEL deals in all types of Utility as per client requirement. All material of construction available in this equipment.

• Production Capacity: 50,000 Kcal/hr to 20,00,000 Kcal/hr
• Delivery Time: 6 Week
• Packaging Details: Standard

A cyclone separator is an economical device for removing particulate solids from a fluid system. The induced centrifugal force (Figure 11.6) is tangentially imparted on the wall of the cyclone cylinder. This force, with the density difference between the fluid and solid, increases the relative settling velocity.

VSEL deals in all types of Utility as per client requirement. All material of construction available in this equipment.

• Delivery Time: 6 Week
• Packaging Details: Standard

A cooling tower is a specialized heat exchanger in which air and water are brought into direct contact with each other in order to reduce the water’s temperature. As this occurs, a small volume of water is evaporated, reducing the temperature of the water being circulated through the tower.

 

VSEL deals in all types of Utility as per client requirement. All material of construction available in this equipment.

• Production Capacity: 300 TR
• Delivery Time: 4 Week
• Packaging Details: Standard

The air source heat pump absorbs heat from the outside air into a liquid refrigerant at a low temperature. Using electricity, the pump compresses the liquid to increase its temperature. It then condenses back into a liquid to release its stored heat. Heat is sent to your radiators or underfloor heating.

• Production Capacity: As per requirement
• Delivery Time: 4 Week
• Packaging Details: Standard

Boilers are pressure vessels designed to heat water and further produce steam, which can then be used to provide space heating and/or desired heat transfer to any heating processes. In most heating applications, the heating source in the boiler is a LDO / Natural Gas / LPG fired burner. Electric resistance heaters can be used as well. Steam is preferred over hot water in many applications.

 

VSEL deals in all types of Utility as per client requirement. All material of construction available in this equipment.

• Production Capacity: 50 kg/hr to 800 kg/hr
• Delivery Time: 4 Week
• Packaging Details: Standard

An industrial chiller is a refrigeration system used to lower the temperature of machinery, industrial spaces, and process fluids by removing heat from the system and transferring it somewhere else. Industrial chillers are essential for temperature regulation in several industrial processes such as injection molding, metal plating, oilfield production, and food processing.
VSEL deals in all types of Utility as per client requirement. All material of construction available in this equipment.

• Production Capacity: 30 - 245 Tr
• Delivery Time: 4 Week
• Packaging Details: Standard

Purity and high flow on-site gas generation requirements. They are the perfect replacement for bulk supplies and expensive and erratic gas supply from merchants in cylinders.
VSEL deals in all types of Utility as per client requirement. All material of construction available in this equipment.

• Production Capacity: Standard
• Delivery Time: 4 Week
• Packaging Details: Standard

Hot Water Generator, is the efficient and cost-effective way to generate hot water instantly. In this type, heat is passed from internal coiling system to the water inside tank and heat transfer application takes place. This type of operation demands lesser energy consumption.

VSEL Hot water generator can be operted on

1. Liquid Fuels – Light oil / Heavy oil
2. Gaseous fuels – LPG or CNG
3. Electrical operation – Element heaters or Electrodes

• Production Capacity: Upto 50000 KL
• Delivery Time: 4-6 weeks
• Packaging Details: Standard

Oxygen enrichment is the generic name for the hazards associated with gases or liquids that contain oxygen concentrations in excess of 21%. As the oxygen in the air increases there is also a significantly increased risk of a fire or explosion.
VSEL deals in all types of Utility as per client requirement. All material of construction available in this equipment.

• Production Capacity: Standard
• Delivery Time: 4 Week
• Packaging Details: Standard

Hot Water Generator is a well-organized and lucrative way to generate hot water instantly. It is designed exclusively for the hot water requirements at Hotels, Hospitals, Resorts, Swimming pools, Dairies, Laundries and various other process industries.

VSEL deals in all types of Utility as per client requirement. All material of construction available in this equipment.

• Production Capacity: 50,000 kcal/hr to 20,00,000 kcal/hr
• Delivery Time: 6 Week
• Packaging Details: Standard